slenderness
英 [ˈslɛndənəs]
美 [ˈslɛndərnəs]
网络 细长度; 长细比; 纤细; 名词; 细长
BNC.40473 / COCA.40756
英英释义
noun
- the property of an attractively thin person
- relatively small dimension through an object as opposed to its length or width
- the tenuity of a hair
- the thinness of a rope
- the quality of being slight or inadequate
- he knew the slenderness of my wallet
- the slenderness of the chances that anything would be done
- the slenderness of the evidence
双语例句
- Study on Wind-induced Vibration Characteristics of Two Classes of Bridge Components with Large Slenderness Ratio
两类大长细比桥梁构件的风振特性研究 - THE INTEGRAL MANUFACTURE TECHNICAL STUDY OF LARGE LENGTH-DIAMETER RATIO COMPOSITES LONG-TAIL NOZZLE Value Selection of Slenderness Ratio and Diameter-Thickness Ratio of Steel Tube for 1000 kV Transmission Steel Tubular Tower Legs
大长径比复合尾管整体成型工艺研究特高压钢管塔主材长细比及径厚比的取值 - According to the relationship between the structural strength and slenderness of plate elements, the limited width-to-thickness ratio of the flange of a box-section column under seismic load is derived.
由构件承载力与壁板宽厚比的关系,得出了抗震设计箱形截面柱翼缘板宽厚比限值。 - According to the slenderness ratio and the maximum windward area, four experiments are designed.
按不同的长细比和不同的最大迎风面积设计了四个实验。 - Based on model experiment and simulated experiment, the formula of equivalent slenderness ratio was established.
在模型试验和仿真试验的基础上,提出了单边连接高强角钢等效长细比公式。 - Volumetric efficiency, slenderness, span over length ratio increase with the cone angle.
体积率、细长比和展长比都随着基本流场圆锥角的增大而增大。 - Bounds slenderness ratio among axial compression short columns, middle long columns and long columns were determined.
确定了钢管煤矸石混凝土轴心受压短柱与中长柱以及中长柱与长柱的界限长细比; - Bearing behavior of cast-in-place piles with similar slenderness ratios in deep soil layer
深厚土层中长径比相近灌注桩承载性状 - Excessive slenderness ratio of the steel pipe concrete piles, initial deflection and tie-in disfigurement will lead to the pile bodys instability and influence its carrying capacity.
淤泥质土对桩身的侧向约束很弱,钢管混凝土桩的长径比过大、初始挠曲、接头缺陷都可能导致桩身失稳而影响其承载力。 - Combined with the proportion of length to width of tongue, the automatic quantitative analysis of plumpness and slenderness of tongues is realized.
该文研究了曲线拟合参数与曲线形状胖瘦的关系,结合舌体的长宽比,实现了舌体胖瘦的自动定量分析。